This simulation is VRF for departments using OSPF. I have setup HR and ACCT to be separated. I also setup the routes to get out to my TFTP server, my workstation. Sh run | redirect tftp://192.168.1.240/iosv1_ShRun.txt so I could send the files below to my workstation.
These routes on iosv-1 allow the simulation to get to my Fortinet 60E firewall 172.16.1.1 and my workstation.
IOSv-1 ip route 0.0.0.0 0.0.0.0 172.16.1.1 ip route 192.168.48.0 255.255.255.224 GigabitEthernet0/2 ip route 192.168.64.0 255.255.255.224 GigabitEthernet0/3 ip route vrf ACCT 0.0.0.0 0.0.0.0 172.16.1.1 global ip route vrf HR 0.0.0.0 0.0.0.0 172.16.1.1 global
You will find ip routes on iosv2 to iosv8 to get out to the real world. iosv2: ip tftp source-interface GigabitEthernet0/1 ip route vrf ACCT 0.0.0.0 0.0.0.0 192.168.64.1 global ip route vrf HR 0.0.0.0 0.0.0.0 192.168.48.10 global
I created loopbacks for both HR and ACCT. IP TFTP command allows each route to get to my workstation. Below are the Sh Run and Sh ip route vrf for both HR and ACCT.