Building configuration...

Current configuration : 3697 bytes
!
! Last configuration change at 14:18:06 UTC Tue Oct 30 2018
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-2
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$bsyZ$EtFPWboNv6kG4oh62/ttU.
!
redundancy
!
no cdp run
!
! 
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.2.2.2 255.255.255.255
 ip ospf 2 area 0
 ipv6 address FD00:10:2:2::2/64
 ipv6 enable
 ipv6 ospf 2 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 10.255.10.175 255.255.0.0
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 description to iosv-1
 ip address dhcp
 ip ospf 2 area 0
 duplex full
 speed auto
 media-type rj45
 ipv6 address dhcp
 ipv6 enable
 ipv6 ospf 2 area 0
!
router ospf 2
 router-id 2.2.2.2
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 172.16.1.0 255.255.255.0 192.168.2.1
ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
ip ssh server algorithm authentication password
ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
!
ipv6 router ospf 2
 router-id 2.2.2.2
!
ipv6 ioam timestamp
!
!
!
control-plane
!
banner exec ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
banner incoming ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
banner login ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login local
 transport input telnet ssh
!
no scheduler allocate
!
end